Can die-cutting punches be placed on the floor? Will the die-cutting machine be shaken when it is placed on the upper floor? These two questions are a lot of questions about buying die-cutting machines and die-cutting presses, and people who need to be placed upstairs will consider them.

The die-cutting machine is a mechanical device of the stamping type, which has large vibration and is easy to generate vibration noise. The vibration and noise generated by the die-cutting machine placed on the upper floor are particularly obvious, which makes many customers have headaches.

Punch presses are divided into two types: punching hardware and punching non-metal. Generally speaking, punching punches of metal will produce great vibration and sound during the stamping process, so these punches can only be placed on the first floor and cannot be placed on the second floor. the above. Stamping non-metallic punching machines (such as Temco's die-cutting presses) will not produce vibration and noise during the stamping process (except for single punch). A better die-cutting punch will not exceed 80 decibels when punching. Normally clapping the palm sound).

And can a specific die-cutting punch be placed on a few floors? According to Tiemei's 20 years of experience in the production of die-cutting machine manufacturers: relatively small, such as 16T, 20T can be placed on the seventh floor, the eighth floor is no problem (must be placed in the beam position); and a larger Die-cutting presses, such as 25T, 30T can be placed on the fourth floor and the fifth floor; the highest level above 40T cannot exceed the second floor, otherwise the floor will resonate and danger occurs.

In addition, the anti-vibration rubber cushion (thickness of 20mm or more) should be placed under the die-cutting punch to relieve vibration.